How to install TFTP: windows 10: add Telnet and TFTP.

CISCO RV325:

"Blinking green PWR LED and solid red DIAG LED"  the device is still at boot loader phase. 

you can use TFTP to upload the firmware to 192.168.1.1 

Below are details about the TFTP upgrade:

1.power off

2.power on with pressing the reset button, wait for 10s, untill the diag LED turn red, and power LED keep flashing.

3.set lan pc to 192.168.1.100 and connect to port 1 on RV325 (Ethernet Properties > Internet Protocol Version 4 > Properties)

4.use tftp client to put the firmware to device. Windows command for 

   example: tftp -i 192.168.1.1 put C:\Router\RV32X_v1.3.1.10_20160215-code.bin

5.after tftp finish, the device will reboot by itself.

6.after startup, power led is on, diag led is off.

----- END -----